K-Tech

  ESP32-CAM Video Streaming with Arduino IDE This article is a quick getting started guide for the ESP32-CAM board. We’ll show you how to setup a video streaming web server with face recognition and detection in less than 5 minutes with Arduino IDE. Note:  in this tutorial we use the example from the arduino-esp32 library. This tutorial doesn’t cover how to modify the example. Watch the Video Tutorial You can watch the video tutorial or keep reading this page for the written instructions. Parts Required To follow this tutorial you need the following components: ESP32-CAM with OV2640  – read Best ESP32-CAM Dev Boards FTDI programmer Arduino Nano Female-to-female jumper wires Introducing the ESP32-CAM The ESP32-CAM is a very small camera module with the ESP32-S chip that costs approximately $10. Besides the OV2640 camera, and several GPIOs to connect peripherals, it also features a microSD card slot that can be useful to store images taken with the camera or ...